Fire Alarm & Fighting

• Microprocessor based conventional flre alarm Repeater panel

• 16 Detection Zones Repeater Panel
• Relay output for fire Condition

• Zones Fault LEOs Indication

• Zones Fire LEOs Indication
• RS485 Port for panel Connection up to 1.2Kmeter distance

• Up to 8 repeater Can be connected to one panel

• sounder Outputs
• 24 Voltage needed from panel

• 4 wire connection to main panel2 for power ,2 for RS485
• This repeater can be connected to any HST Type from 4 Zones to 16

HST Fire Alarm System

12 Detection Zones Panel

• 32 Detector per Zone
• 2 Relay output for fire Condition
• Zones Fault LEOs Indication
• Zones Isolation LEOs indication
• Fault Relay Output
• Auxiliary Output for 28Voltage
• RS48S Port for repeater up to 1.2Kmeter distance
• Up to 8 repeater Can be connected to one panel
• 2 sounder Outputs
• Switched mode power supply 24V,3A with 2 battery charger 12v
• End Of Line Statues Detection
• Short circuti /open circuit detection
• Open collector fault output
• 28 V SOmA fused supply output on Fire
• Switched mode power supply 3A output

HST Fire Alarm System

The HP101U Series ConventionalFire Alarm Control Panel Is a 24 volt, four to sixteen-zone, Class B,Conventional Fire Alarm ControlPanel. De­ signed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective IDC1000 Series can be used in a variety of low- to mid-sized applications.

• Microprocessor based conventional fire alarm controlpanel
• One man test
• 12 Detection Zones Panel
• 32 Detector per Zone
• 2 Relay output for fire Condition
• Zones Fault LEOs Indication
• Zones Isolation LEOs indication
• Fault Relay Output
• Auxiliary Output for 28Voltage
• RS48S Port for repeater up to 1.2Kmeter distance
• Up to 8 repeater Can be connected to one panel
• 2 sounder Outputs
• Switched mode power supply 24V,3A with 2 battery charger 12v
• End Of Line Statues Detection
• Short circuti /open circuit detection
• Open collector fault output
• 28 V SOmA fused supply output on Fire
• Switched mode power supply 3A output

HST Fire Alarm System

The HP101U Series ConventionalFire Alarm Control Panel is a 24 volt,

four to sixteen-zone, Class B, Conventional Fire Alarm Control Panel. Designed exclusively to meet the latest market requirements and future ULC codes, the highly cost-effective IDC1000 Series can be used in a variety of low- to mid-sized applications.

HST Fire Alarm System

• Up to 8 repeater Can be connected to one panel
• 2 sounder Outputs
• Switched mode power supply 24V,3A with 2 battery charger 12v
• End Of Une Statues Detection
• Short circuit /open circuit detection
• Open collector fault output
• 28 V SOmA fused supply output on Fire
• Switched mode power supply 3A output

HST Fire Alarm System

• Panel Hstfire+1 8 Hstfire+9-16.
• Mains Voltage 01AC) 240 240.
• System Vohage (V DC) 28.4 28.4 jUUiescent l:urrent, uns11enced.
• Fault (mA).
• Minimum Battery Size 2 x 12V 7 7.
• Required (Ah).
• Delector Voltage 01DC) 20 20.
• Number of Sense Zones 1-8 9-16.
• Maximum Number of Detectors 30 30.
• Firing Resistance (Ohms) 510 ±200 510 ±200.
• Sense Zone End of Une (Ohms) 31<3 3k3 o\larmVoltaqe (VDC) 28.4 28.4.
• Number of .Alarm Zones 2 2.
• Maximum.Alarm Current per Zone 300 300.
• Maximum Number of Sounder 16 16 o\larm Zone End of Lone (Ohms) 10k 10k.
• Max. AUXIliary :>upp1y o.;urrem sot sot.

HST Fire Alarm System.