Fire Alarm & Fighting
| User name : | |
| Email : | |
| Password : | |
| Confirm Password : | |
| Already Registered ! Click Here to login. | |
| User name : | |
| Password : |
HP201E
Description & Features
• ModelHM201•SC Is a negative-switching• Loop Isolator, which is fully
compatible with HST Intelligent addressable protocol.
• The module incorporates an amber LED to show when it is isolating a
section of the loop, and when used under each addressable Sensor if a single short circuit was to occur on the loop then no Sensors would be lost.
• The HM201-SC does not use an address, and has the same wiring configuration as the HD200 Base making It very simple to install.
• Detects short circuits on loop
• Status LED
• Connection of up to 159 per loop
• Allows connection of Sensors from the HST Range
• Bayonet slot, low Insertion force for detectors
• Quick connection via square cable clamps
Fire Alarm & Fighting
HP203
HP203C Local LCD
Addressable Fire Alarm Control Panel
Repeaters
HP201C View for all events
Designed and manufactured to the highest standards in a quality controlled environment the HP203C fire alarm annunciator provides a simple and convenient method of extending the controls and indications of
the HP201C fire alarm control panel to other locations. The large, graphic liquid crystal display and high brightness LED indicators duplicate the indications on the HP201C Addressable fire alarm control panel at up to 4 additional locations via a simple, two-wire serial data connection. The HP203C is available in a 24V
DC powered (which can be powered via an additional
Fire Alarm & Fighting
HM201-SW
Nominal Operating
Voltage 15 to 28 VDC
Standby Current ≤1mA @ 24 VDC
Maximum Alarm
Current (LED on) ≤5 mA @ 24 VDC
EOL resistance 4.7K Ohms
Operating Humidity
Range
10% to 93% Relative Humidity,
Non-condensing
Operating Temperature
Range -10°C to50°C
Dimension 120 mm L x 80mm W x 43mm H
Weight 175 g
Fire Alarm & Fighting
HM201Z
Description & Features
• ModelHM201•Z is a single Circuit Zone Controller designed to allow up to 15 conventional detectors to be Interfaced to HST addressable system. Full monitoring against malfunction or disconnection,together with a self• test feature through the HST protocol,ensure the integrity of the HM201•Z at all times.
• Single Loop Address
• Powered loop
• Supports one Zone of ConventionalDetectors
• Up to 159 module per loop
• Up to 15 conventionaldetector can be connected to this module
Fire Alarm & Fighting
HM201-S
INTELLIGENT ADDRESSABLE Sounder Module HM201-S
Description & features
• Single Loop Address
• Each Alarm Circuit Fused at 1 amp
• One Sounder Circuits
• Each Circuit Fully Monitored for Open and Short Circuit Faults
• Outputs can be Driven Continuously or Synchronized Pulsed Sounder
Drive
• Model HM201-S is an Intelligent sounder module which has been designed to provide one sounder outputs (that can be driven Bells or Siren) with full fault montioring. The monitored input can be used for local power supply fault monitoring or as a general-purpose input.
• The HM201-S utilises simple DIP switches for reliable addressing