Fire Alarm & Fighting
HD103
Description & Features
- This detector uses a very High Sensitivity UV Filter to Detect the Fast flame fires.
- Highly reliable, long lifeUV receptor tube.
- Low power consumption.
- HD104U can be Intermixed with other types of Detection on the panel’s detection circuitry.
- Easily maintained: cleaning can be accomplished Without disassem
bling the detector.
- This detector is designed to be used with most conventional fire alarm controlpanelwhere ills can work from 9Volt to 32V D.C.
- Itishas Two Led’s on each detector to provide local sso•viewing alarm
indication.
- This detector support ExternalRemote indication LED.
Fire Alarm & Fighting
HD101
Conventional Photoelectric Smoke Sensor
- This Conventional Fixed & Rate of rise Heat Sensor use a thermal sensing Element to detect
- This detector is designed to provide open area protection and to be used with most conventional fire alarm controlpanel where It is can work from 9Volt to 32V D.C.
- It is has Two Led’s on each detector to provide local360° viewing alanm indication.
- It is flash every five seconds Indicating that power is applied and the detector is working properly.
- The Led’s latch on In alarm.Led’s will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alanm can be reset only by a momentary power interruption.
- This detector support ExternalRemote Indication LED
Fire Alarm & Fighting
HD102
Description & Features
- This Conventional Fixed & Rate of rise Heat Sensor use a thermal sensing Element to detect
- This detector is designed to provide open area protection and to be used with most conventional fire alarm controlpanel where It is can work from 9Volt to 32V D.C.
- It is has Two Led's on each detector to provide local360° viewing alanm indication.
- It is flash every five seconds Indicating that power is applied and the detector is working properly.
- The Led's latch on In alarm.Led's will be off when a trouble condition exists indicating that the detector sensitivity is outside the listed limit. The alanm can be reset only by a momentary power interruption.
- This detector support ExternalRemote Indication LED
Fire Alarm & Fighting
HC102
Description & Features
• The HC102 is a Conventional call-point based upon our industry
standard series housing and features easy to install, push•fit wiring terminals.
• The unit can support either a ‘Frangible Glass’ element or a ‘Non
Frangible Plastic’ element.
• Push in and Pull Down Call point
• Can be reset by Key
• Red colour
• Fire proof materials
• 470 Ohm Resistance
• Modern style Call Point
Fire Alarm & Fighting
HB101
Description & Features
• This Conventional6′ Bell very low power consumption
• Voice volume:96dB/(mA)
• Rated current: 10 to 18 mA
• Size: 6′ of DC 24V
• Diameter: 150mm
• Temperature:-10 – 50
• Humidity:at or below 93%
Fire Alarm & Fighting
HD103
- Range 9 to 28 \tOC Volts Non-polarized.
- Standby Current S:120.A@””24VDC.
- Maximum Alarm.
- Current (LED on) S:30mA@24VDC.
- Operating Humid y.
- Range S:95%RH(40°C:t2°C) Relative Humidity,
Non-condensing. - Operating Temperature.
- Range -1o•c to so•c (14°F to 122•F).
- Smoke Alarm Sensitiv y 1.06:t.26%FT.
- Fixed Temperature.
- Rating src.
- Rate of Rise DetectiOn Responds to greater than 8.30C /min.
- Height 42 mm nstalled in Base.
- Diameter 64mm.
Fire Alarm & Fighting
HD102-MINI
- Range 9 to 28 VDC Volts Non•polarized.
- Standby Current 120.A@24VDC.
- Maximum Alarm.
- Current (LED on) 20m.A@24VDC.
- Operating Humidity.
- Range 95%RH(40•c:t2•CJ Relative Humidity,
Non•condensin. - Operating Temperature.
- Range -1o•c to so•c (14•F to 122•F).
- Smoke Alarm Sens iv y 1.06:t.26%FT.
- Temperature Alarm.
- Sens ivity 5?-C (135.F) A1R (only for with heat
sensor). - Height 42 mm nstalled in Base.
- Di ameter 64mm.
Fire Alarm & Fighting
HD101-mini
HD101-MINI- hst -fire(Mini smoke detector)
Operating Vohage
Range
9 to 28 VDC Volts Non-polarized
Standby Current “120 A@24VDC
Maximum Alarm Current
(LED on) “20mA@24VDC
Operating Temperature
Range “95%RH(40°C±2°C) Relative Humidity, Non-condensing
Operating Humidy
Range -1o•c to so•c (14•F to 122•F)
Smoke Alarm Sensit1v y 1.06±2B T
Temperature Alarm
Sensitivit 5?-C (135.F)A1R (only for with heat
sensor)
Height 42 mm installed in Base
Diameter 64 mm
Fire Alarm & Fighting
HS104
- The HS104 is a ConventionalRemote Indication LED which connect to detector to show the alarm conditions with high bright Red Colour LED
- Option white or red color cover
- Support European and USA standard at the same
- Modem Style