HP201E
| User name : | |
| Email : | |
| Password : | |
| Confirm Password : | |
| Already Registered ! Click Here to login. | |
| User name : | |
| Password : |
Description & Features
• ModelHM201•SC Is a negative-switching• Loop Isolator, which is fully
compatible with HST Intelligent addressable protocol.
• The module incorporates an amber LED to show when it is isolating a
section of the loop, and when used under each addressable Sensor if a single short circuit was to occur on the loop then no Sensors would be lost.
• The HM201-SC does not use an address, and has the same wiring configuration as the HD200 Base making It very simple to install.
• Detects short circuits on loop
• Status LED
• Connection of up to 159 per loop
• Allows connection of Sensors from the HST Range
• Bayonet slot, low Insertion force for detectors
• Quick connection via square cable clamps
Product Description
Description & Features
• HP201 (IRIS) is addressable fire detection and indication controlpanel
designed to meet all the requirements of ENS4.
• Modular type panel 1 to 4 Loop Panel
• Certificate ENS41-2/4
• 318 Address per loop (159 detector /159 module)
• 1272 Device maximum per panel
• 96 Programming Zones for each Zone programming delay
• 128 Programmable Input output
• 8 Cause and Effect Can be programmed
• Color Graphics LCD 320X240 displaying fire fault and massages
• Touch screen display to operate the panel easy
• TCP/IP port for programming and Networking up to 32 panels or
repeaters in one network also used for software monitoring function
• USB Port for programming and firmware upgrade
• Day/Night Setting for detectors
• 10 000 Event Log Memory
• 4 Programmable Relay output
• 4 Programmable sounder Outputs
• Switched mode power supply 12V,4A with battery charger 12v,18AH
Additional Information
| Brand Name | HST | Global |
|---|---|
| Fire Alarm & Fighting | Addressable Control Panels |
Reviews
There are no reviews yet.