nBio260
| User name : | |
| Email : | |
| Password : | |
| Confirm Password : | |
| Already Registered ! Click Here to login. | |
| User name : | |
| Password : |
- Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
- Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
- Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
- Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators.
- Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm
- Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
- Easy-to-use and intuitive programming with ZKAccess Software
- System management by browser from client PC’s. No need to install software on each client
- Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
- Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported
- Advanced access control capabilities are built into the hardware, including anti-passback,
- Dual and multi-Card Authentication, and Duress Mode.
Product Description
InBio carries out the matching of fi ngerprints on the panels. The FR Series of readers transmit fi ngerprint templates to InBio via RS-485 for fast and accurate matching with templates stored in a data-base. InBio controllers install easily on your network and support both TCP/IP and RS-485 communication. Auto-discovery tool allows setting and modi cation of network parameters directly and easily.InBio controller fi rmware can be upgraded in the field.Stores up to 3,000 fingerprint templates, 30,000 card users, and up to 100,000 events and transactions. Controller is backed up in real-time in on-board SD card. Data is preserved if power is lost. InBio continues to opperate if network conection is interrupted. Along with relay contacts for controlling door locks, easily programmable auxilary relays can be used for additional control and interface to lights, alarms, annunciators, intrusion detection panels, or even extra locking devices or gate controllers.
InBio controllers come in three sizes to suit project needs and reduce the cost of unused capacity. 1-door, 2-door, and 4-door models can be mixed and matched in an optimized system architecture. Anti-Passback, First-Card Opening, Multi-Card Opening, Duress Password Entry, and Auxilary Input/Output Linkages are built into controller firmware.
Free SDK is available for integrators and OEM’s to integrate the InBio controllers with their or existing security or personnel management applications. Upon request, ZK can also customize InBio fi rmware to meet any custom requirements.
Users 30,000
Event Buffer 100,000 transactions
RAM
RAM 32M
Reader Port
Qty. 2 26/34bit Wiegand
Qty. 2 8bit burst for PIN
Output Port
Qty. 1 1 Aux FORM-C relay output-SPDT 2A@30V AC
Qty. 1 1 FORM-C relay output-SPDT 5A@36V DC or 8A@30V AC
LED
Indicator communication, power, status and prox card
Environment
Operating Temperature 32-113 F (0-45 C)
Operating Humidity 20% to 80%
Packaging
Dimensions 9 1/4″ x 7 3/4″ x 3″
Weight 7.8 lbs (3.55 kgs.)
CPU
32bit 400MHz CPU
Communication
Communication RS485
Communication TCP/IP
Input Port
Qty. 1 Auxillary Input
Qty. 1 Door Sensor
Qty. 1 Request to Enter
Baud Rate
RS485 9600-38400 baud
Power
Power Supply 9.6V-14.4V DC, 1.5A
Dimensions
Length 10″ (160 mm)
Width 6.6″ (106 mm)
Additional Information
| Weather Proof | Indoor |
|---|---|
| Brand Name | ZKTeco | China |
| Verification | Proximity Card |
| Access OR Attendance | Access Only |
| Communication | TCP/IP, USB Flash Memory, Wiegand 26, RS485 |
| Access Control & Time Attedance | Network Devices |
Reviews
There are no reviews yet.